Announcements, releases and milestones from across the platform.

The company says an incident identified on 25 August is affecting its ability to manufacture products and process orders. Cloud systems are unaffected; the damage is confined to certain on-premise systems.

CHINT's first EPC project for the Philippine grid operator replaced a 100 MVA transformer while the old secondary system stayed in service, then rebuilt the switchyard as 12 GIS bays in a five-storey building.

Advantech's SEMICON Taiwan demonstrations fuse EtherCAT motion control with NVIDIA Omniverse simulation and zero-copy GPU data acquisition — a pattern likely to migrate out of semiconductor tools.

Lumos Robotics' MOS2 carries 50 kg across two arms in half a square metre of floor space, and its predecessor ran failure-free for more than a thousand hours inspecting PLCs at a Mitsubishi Electric plant.

HIGEN RNM's actuator platform puts sensing and control in each joint, adjusting force and stiffness locally in under 100 ms and estimating external force without a dedicated torque sensor.

PI's P-606.1P puts a piezoresistive force sensor inside a monolithic flexure gripper — 4 N of clamping force, 500 µm of jaw travel, and no bearings to introduce play during active alignment.

The IH810 puts 5,000 pulses per revolution and galvanic isolation into an 81 mm flange-mount housing with almost no axial depth, aimed at AMR drive wheels and compact gearmotors.

Two thresholds decide it: more than 4.4 pounds and at least 200 kbps of wireless. Fixed arms are exempt, AMRs and AGVs are not, and installed fleets have a firmware-update waiver that expires in 2029.

Micro-Epsilon's optoCONTROL 2700-40 measures multiple segments across 12 mm stainless strip at 5 kHz, while vacuum-compatible capacitive sensors check wafer coplanarity inside hybrid bonding chambers.

METRICAL queues, loads and unloads coordinate measuring machines in three, five or seven bay variants, retrofits to existing MAESTRO and GLOBAL installations, and targets unattended inspection shifts.

System 800xA plus a SIL 3 safety instrumented system will run a 50,000 cubic metre liquefied hydrogen tank at Ogishima, where the cargo is stored at roughly one eight-hundredth of its gaseous volume.

The filing would put phasor measurement, bounded ramp rates and defined ride-through envelopes on loads above 50 MW, with a distinct category for computational load and a December effective date.
Tell us what you're building and we'll help you scope the first deployment.